About this item
- 【Parameter】- Material: Lithium Polymer, Voltage: 22.2V, Configuration: 6S1P, Capacity: 1350mAh, Discharge: 100C, Charging plug: JST-XH, Discharging plug: XT60H connector, Pack: Soft Case.
- 【High Performance】- RACEPOW 1350mAh Lipo Battery with 100C discharge rate offers long running time, powerful energy and at least 200 times cycle life for your rc models.
- 【Wide Compatible】- Specially design for Skylark m4-FPV250, Vortex, Nemesis 240 mini, LRC Freestyle V1(270-296), FLIP FPV 2505 MINI, MINI Shredder 200, QAV250, Emax Nighthawk 250, drone and FPV Quadcopter etc.
- 【Professional】- RACEPOW 6S Lipo Battery has advanced technology and strict QC team. Our factory controls the quality strictly and provides you with batteries with consistent resistance and voltage and stable discharge curve.
- 【After-sales service】- Offer you 2 packs of 1350mAh 22.2V 100C Lipo Battery with XT60H plug and friendly customer services. If you have any problems, pls feel free contact us anytime and we will reply you within 24 hours.
RACEPOW 1350mAh 6S Lipo Battery compatible for kylark m4-FPV250, Vortex, Nemesis 240 mini, LRC Freestyle V1(270-296), FLIP FPV 2505 MINI, MINI Shredder 200, QAV250, Emax Nighthawk 250, Indy250 plus mojo 280, RC airplane, RC helicopter, RC boat etc.
Our lipo battery provide steady discharge curve, high discharge rate to reach the top speed with the most stability and power your rc model.
Safe Charging
- Pls use professional Lipo Battery Charger. Use the correct type of charger. Like B6AC Charger.
- Before using it, please full charge it. The safest charge rate for lipo batteries is 0.5C -1C.
- Keep metal tools and jewelry away from batteries. Keep a neutralizing solution close by.
- Please don’t Leave a Battery Charging Unattended!
- Please recharge your batteries regularly, do not wait for the battery to run out before charging it.
Correct connection instructions to conventional chargers when charging lipo batteries
- Connect the power connectors to the balance charger’s power slots. Remember that black goes to negative, and red goes to positive.
- Connect the clamps of the power connectors to your battery. Make sure that you connect red to red and black to black.
- Insert the balance connector of your battery to the designated slot in the balance charger.
- Turn on the balance charger and go to the Balance Charge setting.
- Select your battery type. Check the connections and once you’re sure, press the Start button and then confirm.
Store lipo batteries
- Lipo should be stored at 3.8V per cell. So if the lithium battery is not used for a long time, it needs to be fully charged to 3.8V per cell, or discharged to 3.8V.
- Keep batteries at room temperature. Do not place batteries in direct sunlight or keep them in hot vehicles. Store batteries away from anything that can catch fire.
- Always disconnect batteries when not in use and store batteries in a non-conductive and fireproof container, like lipo safe bag.
Friendly Tips
- For the lipo battery, only if the voltage, dimension and plug match, then it will fit.
- Check the battery condition carefully using or charging.
- The voltage difference between any two cells should be in 0.03V, or charge is advised to balance the voltage before use. Don’t over charge exceed 4.2V and don’t over discharge below 3.2V.
- Never short circuit lipo or use damaged lipo. Never charge lipo over 2C or charge lipo unattended. Never expose lipo to fire or water.
- If the new battery won’t hold a full charge or loss the charge very quickly in short time, pls use Balance Charger to charge and recycle several times first.